APLIKASI PID

Rp457,380,000.00

APLIKASI PID
Add to Cart
Spesifikasi :
Alat ini digunakan sebagai perangkat pelatihan sekaligus alat ukur untuk menjelaskan
karakteristik pemahaman teknologi PID
Part list :
Power supply 24 Vdc
Packaging dimension : 39.5 cm x 29.5 cm x 52.5 cm
Assembly area : 35 cm x 20 cm
Max. Height max. Construction : approx. 110 cm
Power supply unit 24 Vdc, 4.5 A required
Electrical interface board, pre-wired and consisting of :
 – Terminal block for 8 digital outputs, 8 digital inputs, each with LED status
indicator, connection for 24 Vdc and IEEE 488/24-pin compatible plug
connection
 – Terminal block for analogue signals with 15-pin SUB-D connection and
threaded contacts
 – 24 Vdc DIN H-rail relay with operating indicator, 2 changeover contacts
for switching the pump from motor controller 0 – 10 V/0 – 24 V to 24 V on/off
 – Motor controller with pulse width modulation for dc motor with :
switching voltage range/motor voltage 18 Vdc – 35 Vdc, max. Steady load
current 3.5 A, current limitation up to thermal shutdown 15 A, speed 0 V –
Vcc adjustable, performance driver MOSFET
 – Starting current limiter
 – 4-wire basic terminal block
 – Connection block, 2-pin
 – 2x capasitive sensor with mounting components and cable
 – Ultrasound proximity switch, analogue output 0 – 10 V, adjusted for 3 L tank
measuring range : programmed to 48 – 270 mm, characteristic curve :
programmed “descending”; operating voltage 24 Vdc incl. plug socket with
cable
 – Flow sensor with rotor and opto-electronic (infrared) evaluation, measuring range: 0.3 – 9.0 l/min; frequency range (output): 40 – 1200 Hz; permitted operating voltage: 8 – 24 V DC; current consumption: 18 – 30 mA; max. load: 2.2 kOhm; K factor (pulses/dm3): 8000; electrical connection: cable 3-pin; including f/U transducer and cable
 – Pressure sensor 0 – 400 mbar, analogue output 0 – 10 V DC/3 wire, pressure transducer with ceramic measuring cell; process connection: G ½; stainless steel housing; operating voltage: 24 V DC; load at signal output: > 2.5 kOhm; incl. connecting cable and screw-in fitting
 – Directly controlled 2/2-way solenoid valve DN 10, incl. switch relay terminal; idle position closed, no pilot pressure required to open the valve; connection: G ½; pressure difference: 0 – 0.3 bar; static pressure: max. 10 bar; max. ambient temperature: 50 °C; housing material: brass; operating voltage: 24 V DC ±10 %; power consumption: 8 W; Kv value (water, +20°C): 1.2 m3/h (measurement 1 bar valve input, free outlet); incl. connecting cable and screw-in fitting
 – Equipment tray, 100% ABS plastic, modular system, connectable using patented connection system, incl. carrying handle, approved for postage as shipping container; inserts with carrying handle, stackable using handle with compartment dividers

Browse to your heart's content and the stuff you've looked at will be right here

Back to Top

WhatsApp chat