Advance Pneumatic Training System

Rp484,000,000.00

Advance Pneumatic Training System
Add to Cart
Spesifikasi :
Peralatan training untuk pembelajaran pengendalian pneumatik tingkat lanjut. Peralatan ini telah dilengkapi dengan quick-fix mounting yang memudahkan pemasangan komponen-komponennya pada aluminium profile plate. Peralatan training ini minimal terdiri dari :
2x 3/2 way valve with pushbutton, NC
– Design: Poppet valve, directly actuated, one side, with return spring
– Pressure range: 0 – 800 kPa (0 – 8 bar)
– Nominal flow rate 1…2: 60 l/min
1x 3/2 way valve with emergency switch, NO
The valve is actuated by pressing the red mushroom-head emergency button. When the pushbutton is released, the circuit state is retained. The mushroom-head emergency button is returned to its normal position by rotating clockwise and the valve is returned to its initial position by a return spring.
• Design: Poppet valve, directly actuated, one side, with return spring
• Pressure range: 0 – 800 kPa (0 – 8 bar)
• Nominal flow rate 1…2: 60 l/min
1x 3/2 way roller lever valve with idle return, NC
3/2-way roller lever valve with idle return, normally closed Poppet valve, indirectly actuated in one direction (minimal actuating force with pilot control), with spring return, Precision quick plug connector for plastic tubing PUN-4 x 0.75 and/or for tubing types with standard inner or outer diameter, Safety mounting with rotary system for slotted profile plates for any adjustments
•Pressure range: 3.5 … 800 kPa (3.5 … 8 bar)
•Standard nominal flow rate: 1(P) –> 2(A) 120 l/min
•Actuating force at 600 kPa (6 bar) 1.8 N”
1x Back pressure valve
The back pressure valve with plunger control is actuated by the face of the cylinder cam. The supply pressure can be regulated by means of a one-way flow control valve
•Supply pressure range: 0 – 800 kPa (0 – 8 bar)
•Closing force at 600 kPa (6 bar): 12.5 N
4x 3/2 way valve, pneumatic act single
Directly actuated monostable piston spool valve with mechanical spring return, normally closed. Convertible to open neutral position. Quick push-in connector for plastic tubing PUN-4 x 0.75 and for internally or externally calibrated hoses. Quick action mounting system Quick-Fix® for slotted profile plates. Symbol, port identification and position of connection as per DIN ISO 1219.
• Operating pressure -90 – 1000 kPa (-0.9 – 10 bar)
• Pilot pressure 150 – 1000 kPa (1.5 – 10 bar)
2x 5/2 way double pilot valve, pneumatic both ends
Directly actuated, bistable piston spool valve. Quick push-in connector for plastic tubing PUN-4 x 0.75 and for internally or externally calibrated hoses.Quick action mounting system Quick-Fix® for slotted profile plates. Symbol, port identification and position of connection as per DIN ISO 1219.
• Operating pressure -90 – 1000 kPa (-0.9 – 10 bar)
• Pilot pressure 150 – 1000 kPa (1.5 – 10 bar)
• Suitable for vacuum and reverse operation
2x plastic tubing 4 x 0.75 silver 10 m
Very flexible and pressure secure.
PUN 4 x 0.75″
• Exterior diameter: 4 mm
• Interior diameter: 2.6 mm
PUN 6 x 1
• Exterior diameter: 6 mm
• Interior diameter: 4 mm
to one of the inputs (OR function).
• Design: OR gate (shuttle valve)
• Pressure range: 100 – 1000 kPa (1 – 10 bar)
• Nominal flow rate 1, 1/3…2: 500 l/min
3x Dual pressure valve (AND)
The dual-pressure valve is switched through to the output by applying compressed air to both of the inputs (AND function).
• Design: AND gate (dual-pressure valve )
• Pressure range: 100 – 1000 kPa (1 – 10 bar)
• Nominal flow rate 1, 1/3…2: 550 l/min
1x Pneumatic timer, NO
Pneumatic timer (time delay valve). In the normal position, port 1 is switched through to port 2. The pneumatic timer is started by a pneumatic signal at the control port. It is actuated at the end of a set time delay and reset via spring return to the initial position after the signal has been removed. The time delay is infinitely adjustable between 2 and 30 sec. via an adjusting knob.
1x Pneumatic preset counter
The pneumatic preset counter counts pneumatic signals, decrementing from a preset number. When zero is reached, the counter emits a pneumatic output signal.
•Design: Mechanical counter with pneumatic drive
•Display: 5-digit, character size 4.5 mm
•Reset: Manual pushbutton or pneumatic signal
•Pressure range: 200 – 800 kPa (2 – 8 bar)
•Minimal pulse duration Drive: 10 ms
•Minimal pulse duration Reset: 180 ms
•Continuous counting frequency: 2 Hz”
1x Stepper module
Stepper module, comprising three TAA modules and one TAB module.
•Design: Poppet valve with integrated AND and OR gates
•Nominal flow rate P…A: 60 l/min
•Pressure range: 200 – 800 kPa (2 – 8 bar)
2x One-way flow control valve
nonreturn valve. The cross-section of the restrictor can be set by means of a knurled screw.
• Design: One-way flow control valve
• Pressure range: 20 – 1000 kPa (0.2 – 10 bar)
• Nominal flow rate, in flow control direction: 0 – 85 l/min, in open direction: 100 – 110 l/min
2x Non-return valve, delockable
As long as a pilot signal is applied to the non-return valve, compressed air should flow to and from the cylinder. When the pilot signal is cancelled, the non-return valve should shut off the cylinder exhaust air, thereby stopping the cylinder motion. The valve should be suitable for use for positioning and braking functions.
•Operating pressure: 0.5 … 10 bar
•Standard nominal flow rate: 108 l/min
2x Double acting cylinder
Double-acting cylinder with control cams. End-position cushioning with two adjusting screws. A permanent magnet is mounted on the cylinder piston. Its magnetic field can trigger a proximity switch.
• Design: Piston cylinder
• Operating pressure: Maximum 1000 kPa (10 bar)
• Stroke length: Maximum 100 mm
• Thrust at 600 kPa (6 bar): 165 N
• Return thrust at 600 kPa (6 bar): 140 N

 

SKU: PPP-AP102 Category:

Browse to your heart's content and the stuff you've looked at will be right here

Back to Top

WhatsApp chat